Float the MR-1 CNC Gantry Mill Base with a Durable Epoxy Finish. This Kit Includes: ½ Gallon Of Epoxy Part A ½ Gallon Of Epoxy Part Bx Dark Gray Pigment Powder This kit provides everything needed to apply a protective epoxy surface to the concrete base. While not required on your MR-1 machine, the epoxy leveling kit has many benefits: The epoxy self leveling characteristics help to create a near perfectly flat surface that fills in any low spots in the concrete and creates a smooth to the corner drains when running flood coolant. It seals the concrete from water and coolant It seals the concrete from water and coolant The smooth nonporous surface is easy to clean between projects and looks visually appealing This 1 gallon epoxy kit is very simple to apply. Simply mix part A, part B, and the pigment powder. Pour it evenly over the entire surface of the cured concrete until it is fully encapsulated. The epoxy is self leveling and will even out to create a near perfectly flat surface. Curing takes approximately 12 hours to reach full hardness. Note: Concrete must cure for 5 days before applying epoxy.
MR-1 Add-Ons – Langmuir Systems
Pro Marine 5:1 Boat Epoxy Kit – Our Total Penetrating Quart Slow Hardener – Marine Grade Epoxy Clear
MR-1 (Pt. 2) Cement and epoxy
MR-1 Add-Ons – Langmuir Systems
SMR-260G-Q/261-8 2.1 VOC Epoxy DTM Primer/Sealer Gray - Speedokote LLC
PRO MARINE - 釣り糸
Pro Marine 5:1 Boat Epoxy Kit – Our Total Penetrating Quart Slow Hardener – Marine Grade Epoxy Clear
Fibre Glast System 1000 Epoxy Resin - Quick Repair Kit - Gallon
Epoxy Resin Kit 1/2 Gallon – Hippie Crafter