Tsunoda MR-150SP, Multi Purpose Needle Nose Pliers, 6-Inch

Good needle-nose pliers should have jaws that maintain precise alignment, operate smoothly and don’t flex under force. Sized for detail work, these perform well on all counts. Each has narrow, tapered jaws with a lightly hatched surface for good grip at the tips, adjacent to smooth surfaces used for bending material with less risk of marring. A 1/4 gap in the jaws (known as a burner hole) has toothed sidewalls for a firm bite on round materials.

Kìm nhọn mini đa năng MR-150SP King TTC / Tsunoda Nhật Bản

Tsunoda, PW-232DG, POWER Multi Purpose Long Nose Pliers

TSUNODA MR-115DG, Long Nose Pliers 4.5-Inch TG grip

Tsunoda WP-250SC-S Water Pump PLA-iers, Resin Jaw Water Pump Pliers, 10-inch : : Automotive

TSUNODA Long Nose Cutting Pliers MR-150SP L=150mm with Spring

Cutting capacity (AWG) : Stainless 16/ Soft Iron 14/ Copper 12/ Brass 14/Stranded copper wire 12 45° angled bent nose pliers Serrated jaw, w/ spring

Tsunoda RB-125, Needle Nose Pliers Bent type, 5-Inch

Tsunoda TM-08 Flat Slender Nose Pliers 130mm (5-Inch)

Cutting capacity (AWG): Stainless 14 / Soft iron 12 / Copper 10 / Brass 12 / Strand copper wire 10 Long nose pliers with multi functions. Stripping

Tsunoda KRP-150 Multi Purpose Long Nose Pliers (6-Inch)

TSUNODA Long Nose Cutting Pliers MR-150SP L=150mm with Spring

Cutting Capacity (AWG): Stainless 16 / Soft iron 12 / Copper 10 / Strand wire 14 Stripping hole : φ1.5mm Crimp die / Oval shaped serration for nut turning Highly recommended long nose pliers for professional use. 30% of cutting load is reduced compared with ordinal products by eccentric structure. Made in Japan Highly recommended long nose pliers for professional use. 30% of cutting load is reduced compared with ordinal products by eccentric structure.

Tsunoda, PW-232DG, Power Multi Purpose Long Nose Pliers