This 20 tooth servo gear has a 15 tooth servo spline found on numerous Hitec Large Size (aka Giant Scale) servos. The splined hole allows this servo gear to fit snugly onto the splined output shaft of your servo. The stock servo screw will pull the gear in place so that it bottoms out on the top of the spline, ensuring the gear will run true. Given the repeating hole pattern of Actobotics Channel, this gear is most commonly mated to an 76 tooth hub gear spaced 1.5” apart to create a 3.8 reduction between the servo gear and the driven gear. Patented. 20° Pressure AngleWidth = 1/4” (.250”)
ServoCity, Actobotics
1908 Series Servo Hub (25 Tooth Spline, 32mm Diameter) - ServoCity
32P, 20 Tooth, 15T D1 Spline Servo Mount Gear (Metal)
20 Tooth Press Fit Sprocket (0.1227 Pitch, 0.250 Bore) - ServoCity
ServoCity, Actobotics
12 Tooth 32 DP Servo Spline Bore Brass Gear - AndyMark, Inc
Brass, 32P, 20 Tooth, D15T Spline Servo Gear - ServoCity
12 Tooth 32 DP Servo Spline Bore Brass Gear - AndyMark, Inc
1908 Series Servo Hub (25 Tooth Spline, 32mm Diameter) - ServoCity
This 20 tooth servo gear has a 15 tooth servo spline found on numerous Hitec Large Size (aka Giant Scale) servos. The splined hole allows this servo
Brass, 32P, 20 Tooth, D15T Spline Servo Gear