Radiator Cleaner by LIQUI MOLY – LM Performance

PRODUCT DESCRIPTION Deposits in the cooling/heating system create blockages for heat exchange and they also block thermostat valves and control mechanisms. When engine temperatures are too high, the engine runs uneconomically and suffers excessive wear at considerable risk of damage. LIQUI MOLY Radiator Cleaner removes
PRODUCT DESCRIPTION Deposits in the cooling/heating system create blockages for heat exchange and they also block thermostat valves and control mechanisms. When engine temperatures are too high, the engine runs uneconomically and suffers excessive wear at considerable risk of damage. LIQUI MOLY Radiator Cleaner removes deposits containing oil and lime, and ensures that the engine runs reliably and at the optimum temperature. Does not contain aggressive acids or alkalis. For all coolant and heating systems in water-cooled engines. 300 ml is sufficient for 10 l of coolant (dosage 1:33). Compatible with all conventional coolant additives and antifreezes. PRODUCT DETAIL A concentrate specially developed for cooling systems in general but particularly those in motor vehicles. Dissolves contaminants containing oil and lime in radiators, heating systems, lines and engines. Modern formula containing complexants with active cleaning agents. PROPERTIES - Does not contain acids or alkalis- Disperses sludge- Removes oil and grease residues- Chemical conversion of lime- Neutralizes acids- Neutral behavior in contact with rubber and plastics- Compatible with antifreezesTECHNICAL DATA Form: flüssig / liquidColor / appearance: weiß, leicht trüb / white, light unclearHazard class as per German VbF: keine / nonepH value: ~8,7Solubility in water: löslich / solubleOdor: charakteristisch / characteristicDensity at 20 °C: 1,015 g/cm³AREAS OF APPLICATION Suitable for all cooling water systems in motor vehicles, buses and commercial vehicles. APPLICATION Add contents to the cooling water. Then start up the heater and, depending on the level of contamination, let the engine run at operating temperature for 10 – 30 min. After finishing cleaning, drain the coolant/cleaner mixture, thoroughly flush the cooling system with water and refill it according to the manufacturer’s instructions. The content (300 ml) is sufficient for 10 l of coolant (dosage 1:33).

About Liqui Moly. Radiator Cleaner - Case Quantity of 12 - 300ml Cans. Approvals by the automotive industry and the fulfilling of the highest

New Radiator Cleaner (Case of 12) - Liqui Moly LM2051 300ml Cans

Liqui Moly - Radiator Cleaner 300Ml - Lm-8369 - Apex Trading

ApplicationAdd contents to the cooling water. Turn the heating to maximum and let the engine run on idle for 10 - 30 minutes depending on the degree

Liqui Moly Radiator Cleaner Flush (1) 300ml Can LM2051

Radiator Cleaner

Liqui Moly Radiator Stop Leak, 250 ml

Pro-Line Diesel Intake System Cleaner (400ml) - Liqui Moly LM20208

Liqui Moly Radiator Stop Leak, 250 ml

LIQUI MOLY Radiator Stop-Leak completely seals such leaks immediately with ease Secures the combustion chamber from damages caused by coolant

Liqui Moly Radiator Stop Leak | 250 ml | Cooler additive | SKU: 20132

Flushes and Cleans Radiators Increase Performance

Liqui Moly Radiator Flush Cleaner (2 Pack)

Aspecial tool for the application of the LIQUI MOLY A/C System Cleaning Fluid (part no. 20001). Produces a circular spray pattern to allow proper cleaning of evaporator. The reservoir uses a quick connector for easy hook-up and handling during application.

Liqui Moly 4090 - Air Conditioner System Cleaner Gun

Best Radiator Cleaner and Radiator Stop Leak (Liqui Moly Test