Metal Cleaner and Degreaser – Sculpt Nouveau

Sculpt Nouveau Metal Cleaner and Degreaser has been specially developed for the rapid and complete removal of rust, dirt, oil, and grease from most metal surfaces in preparation for finish applications. This ready-to-use formula removes oxidation quickly and efficiently without leaving any residue or buildup that would
Sculpt Nouveau Metal Cleaner and Degreaser has been specially developed for the rapid and complete removal of rust, dirt, oil, and grease from most metal surfaces in preparation for finish applications.

This ready-to-use formula removes oxidation quickly and efficiently without leaving any residue or buildup that would prevent finish adhesion. Additionally, the Metal Degreaser contains corrosion inhibitors that protect the metal surface during cleaning.

The Metal Cleaner and Degreaser is not a polish and will remove the finish on polished and plated surfaces. It is available in 8oz., 32oz., 1 gal., and 5 gal. sizes. The 8oz. and 32oz. sizes include a spray top. One gallon of Metal Cleaner and Degreaser generally covers 200 sq. ft. per coat. Two to three coats are recommended.

Proper Metal Preparations and Techniques

Products – Sculpt Nouveau

Sculpt Nouveau - Today for Tid Bit Tuesday, we wanted to discuss a little more on proper cleaning techniques. Attached to this post is a photo showing two pieces of cold rolled

Sculpt Nouveau

Metal Coatings – Sculpt Nouveau

Sculpt Nouveau Fox and Superfine

turns liquid patinas into a gel patina to allow for easier application on vertical surfaces. To mix, add the gel by weight or volume up to a 1:1

Patina Gel

Metal Coatings – Sculpt Nouveau

Products – Sculpt Nouveau