Dritz Loop Turner

Dritz Loop Turner

5
(653)
Write Review
More
$ 2.50
Add to Cart
In stock
Description

Item Number: 647 Use the Dritz Loop Turner 9-1/2″ for fabric cylinders that need to be turned right side out to make narrow straps, button loops and frog closures. This simple and handy tool slides through the bias tubing while the latch hook on the end catches the end of the fabric and pulls it through the tube. It is

Item Number: 647

Use the Dritz Loop Turner 9-1/2″ for fabric cylinders that need to be turned right side out to make narrow straps, button loops and frog closures. This simple and handy tool slides through the bias tubing while the latch hook on the end catches the end of the fabric and pulls it through the tube. It is perfect for making spaghetti straps, frog closures, button loops, Chinese ball buttons, purse straps and more.

  • For turning bias tubing, button loops, frog closures, Chinese ball buttons, purse straps and shoulder straps

Quantity: 1 PC

Color: Silver

Instructions & Tutorials

1. Cut bias strip two times desired width of tubing plus 1/2 inch for seam allowances. Add 2 to 3 inches to cut length for turning.
2. Fold right sides together lengthwise and stitch 1/4 inch seam.
3. Trim seam allowances and cut one end of tubing on an angle. TIP: Reinforce fabric point with Fray Check.
4. Insert Loop Turner through tubing and push latch through fabric about 1/4 inch from point.
5.Pull Loop Turner toward you, guiding tubing over hook until it begins to turn inside out. Continue to pull Loop Turner being careful not to disengage hook.

 

TIP: Use to pull serger tails back through serger stitching.


Item Number: 647 Use the Dritz Loop Turner 9-1/2″ for fabric cylinders that need to be turned right side out to make narrow straps, button loops and frog closures. This simple and handy tool slides through the bias tubing while the latch hook on the end catches the end of the fabric and pulls it through the tube. It is perfect for making spaghetti straps, frog closures, button loops, Chinese ball buttons, purse straps and more. For turning bias tubing, button loops, frog closures, Chinese ball buttons, purse straps and shoulder straps Quantity: 1 PC Color: Silver Instructions & Tutorials 1. Cut bias strip two times desired width of tubing plus 1/2 inch for seam allowances. Add 2 to 3 inches to cut length for turning. 2. Fold right sides together lengthwise and stitch 1/4 inch seam. 3. Trim seam allowances and cut one end of tubing on an angle. TIP: Reinforce fabric point with Fray Check. 4. Insert Loop Turner through tubing and push latch through fabric about 1/4 inch from point. 5.Pull Loop Turner toward you, guiding tubing over hook until it begins to turn inside out. Continue to pull Loop Turner being careful not to disengage hook.   TIP: Use to pull serger tails back through serger stitching.

Tulip SONAERU 備 Loop Turner SC-029 Two Sizes

A demonstration of the Dritz Loop Turner

Dritz- Loop Turner 647

Point Turner & Seam Creaser — Prym Consumer USA Inc.

Dritz Loop Turner - Loop Turner - Sewing Supplies - Notions

Dritz Loop Turner - Loop Turner - Sewing Supplies - Notions

Toolbox Tuesdays, Quilts and Lace

Dritz 9-1/2 Turning Bias Tubing, 1 Count Loop Turner, Silver

Loop Turner for Bias Tubing - 10.25 inches from Tooltron

The Dritz® loop turner is a handy sewing tool used for turning bias tubing, button loops, frog closures, Chinese ball buttons, purse straps and

Loop Turner

Point Turner/Button Gauge - 5 1/2 - WAWAK Sewing Supplies

Dritz Loop Turner - Ripstop by the Roll

Dritz : Loop Turner