This is a superior exterior coating formulated to produce a high quality, flexible finish to withstand water and weather. /p> This is a superior exterior coating formulated to produce a high quality, flexible finish to withstand water and weather. It also contains ultraviolet absorbers for advanced sun protection. Available in satin, semi-gloss and gloss sheens. Where to Use Spar-Marine Varnish is recommended for use on exterior wood, fiberglass, coated metal, or painted surfaces. It can be used on unfinished wood surfaces or previously finished surfaces. This finish can also be used over stained surfaces that have thoroughly dried. Ideal for use on exterior surfaces, such as fences, railings, lawn furniture, doors, boats, and marine surfaces. For interior use on windowsills and door frames for added ultraviolet protection. DO NOT USE on wooden decks or steps, wood siding, log homes, or
This is a superior exterior coating formulated to produce a high quality, flexible finish to withstand water and weather. /p>
This is a superior exterior coating formulated to produce a high quality, flexible finish to withstand water and weather. It also contains ultraviolet absorbers for advanced sun protection. Available in satin, semi-gloss and gloss sheens.
Where to Use
Spar-Marine Varnish is recommended for use on exterior wood, fiberglass, coated metal, or painted surfaces. It can be used on unfinished wood surfaces or previously finished surfaces. This finish can also be used over stained surfaces that have thoroughly dried.
Ideal for use on exterior surfaces, such as fences, railings, lawn furniture, doors, boats, and marine surfaces. For interior use on windowsills and door frames for added ultraviolet protection. DO NOT USE on wooden decks or steps, wood siding, log homes, or wood boats below the water line.
Surface Preparation
All surfaces must be clean, dry, and free from dirt, wax, grease, glue, and other contaminants or penetration and adhesion will be affected.
Bare Wood: Sand surface thoroughly with medium grit sandpaper and progress to fine grit sandpaper. Always sand in the direction of the wood grain. Remove dust with a tack rag.
Previously Finished Surfaces: Surface should be sanded to remove imperfections and gloss, using extra fine sandpaper (220 grit) and, sanding with the grain. Remove dust with a tack rag.
Stained Surfaces: Stain must be thoroughly dry before applying clear finish. Do not sand uncoated stained surface.
Note: If a sealer is desired, we recommend Old Masters Penetrating Sealer.
Application
Stir thoroughly before and during application. DO NOT SHAKE. Do not apply in direct sunlight or areas of extreme air movement.
Maintenance
As with all exterior clear finishes, this product will not offer unlimited protection against the elements. Surfaces which receive direct sunlight may have to be re-coated annually to maintain gloss and to prevent cracking and peeling.
Thinning
Do not thin. Use as packaged.
Coverage
Approximately 500 square feet per gallon. Coverage will vary significantly depending on application method and condition of wood.
Drying Time
Apply when air and surface temperatures are between 60° and 90°F and humidity is between 30% and 70%. At 50% relative humidity and 70°F, Spar-Marine Varnish will dry to touch in 6 to 8 hours. Under ideal drying conditions, allow 8 to 16 hours before recoating. Overnight drying is recommended. Drying time will be affected by temperature, humidity, and film thickness. Protect product from freezing prior to and during application.
Wait 24 hours before subjecting surfaces to light use. Care should be used during the first week after application as the finish is curing to its ultimate hardness.
Cleanup
Using a cleaning solvent, such as paint thinner or mineral spirits, is recommended for cleanup. The use of paint thinners or mineral spirits may violate VOC compliancy in your area. Check with your local government agencies to ensure proper compliancy.
RUST-OLEUM® Marine Coatings Spar Varnish
RUST-OLEUM® Marine Coatings Spar Varnish | Capitol City Lumber
Rust-Oleum Marine Coatings Spar Varnish is exterior polyurethane for wood surfaces above the waterline. It provides a warm golden glow that enhances wood's natural beauty while protecting it from UV, salt and mildew. It's tough, flexible, long-lasting coating expands and contracts with changing weather conditions. Ideal for use on exterior wood surfaces above the water line, including trim, railings and wood furniture. Oil-based formula expands and contracts with changing weather conditions.
Rust-Oleum Gloss Clear Marine Spar Varnish 1 qt.
Penofin FAHNSGA TSF Architectural Hardwood Stain, Natural Satin Finis
A Better Way to Apply Spar Urethane? - The Wood Whisperer
The 13 Best Marine Varnishes Reviewed in 2024
Spar-Marine Varnish
Spar-Marine Varnish
How to Apply Total Boat Marine Spar Varnish - Satin Finish
Lust is the first true one-part marine varnish that allows multiple coats in one day without even sanding between coats. It cures to a warm rich amber finish. This varnish is truly a special exciting innovation. Traditional marine varnishes require tedious sanding between coats and their thin film build means 15 20 or even more coats. And then there are the marine wood finishes that mimic the look of varnish but are no substitute for the real thing.
TotalBoat Lust Marine Varnish (High Gloss, quart)
How to Remove Paint Can Lid Locks
Rust-Oleum Marine Coatings Spar Varnish Gloss Clear Oil-based
Spar-Marine Varnish
Spar Marine Varnish Vs Spar Urethane For Paddles, Canoes, 40% OFF
McCloskey Man O War Satin Clear Marine Spar Varnish Gallon
Old Masters Spar-marine Varnish, Clear Finish Topcoat, Outdoor