The Ultimate Rope Cutting Hot Knife. hsgm heißschneider hot knife HSGM-0 is ready to cut in 6 seconds, producing a clean, consistent cut. Used for Polyester, Dyneema, Spectra, Nylon & Other Modern Ropes

sailThe Ultimate Rope Cutting Hot Knife

For decades HSGM has consistently produced the best Hot Knives on the market. The iconic green handset of the HSG-0 is a staple across the marine industry.

From pressing the trigger, the blade takes around 6 seconds to reach cutting temperature, producing a clean, consistent cut, preventing the fibres from unravelling. Please note that due to their exceptional heat resistance Aramid fibres such as Kevlar® & Technora® will not melt and seal like Polyester, Dyneema®or Spectra.

A hot knife is one of the simplest rope cutters available, providing a great base to add a whipping or heat shrink to keep ends together under active use. 

Spare R Blades are available under options.  

Package Contents

• 2m cord with 3 pin UK plug
• R shaped cutting blade
• Operating instructions with EC Declaration of Conformity
• CE Mark

Technical

• Supply voltage: 230V - 50Hz (110V - 60Hz)
• Power input: 60 Watt

See Rope Cutters for our selection of rope cutting hardware 

sailThe Ultimate Rope Cutting Hot Knife For decades HSGM has consistently produced the best Hot Knives on the market. The iconic green handset of the HSG-0 is a staple across the marine industry. From pressing the trigger, the blade takes around 6 seconds to reach cutting temperature, producing a clean, consistent cut, preventing the fibres from unravelling. Please note that due to their exceptional heat resistance Aramid fibres such as Kevlar® & Technora® will not melt and seal like Polyester, Dyneema®or Spectra. A hot knife is one of the simplest rope cutters available, providing a great base to add a whipping or heat shrink to keep ends together under active use.  Spare R Blades are available under options.   Package Contents 2m cord with 3 pin UK plug R shaped cutting blade Operating instructions with EC Declaration of Conformity CE Mark Technical Supply voltage: 230V - 50Hz (110V - 60Hz) Power input: 60 Watt See Rope Cutters for our selection of rope cutting hardware 

Handheld unit HSG-0

HSGM Heater Cutter HSG-0 with cutting edge R : : DIY & Tools

The HSGM HSG-0-US is a heat cutter suitable to cut & seal the edges of, synthetic material such as rope, Dyneema, Nylon, sail, tarpaulin, nets,,

HSGM rope cutter and sail cutter, HSG-0-US without blade - 110 Volt

most popular heat cutter

HSGM heat cutter HSG-0

Hot Knife Heat Cutter #HSG-O 2.2 lb

Marlow Cordless Battery Operated Hot Knife

Polystyreensnijder - HSGM - Leiding-Pijp-Slang Groevensnijder

Hot Knife HSG-0 & Blade Type R 29 mm for Paracord & Webbing - TACTICALTRIM

Heavy Duty Handheld Hot Knife HSG-0 (HSGM) German, 56% OFF

Hand Held Hot Knife with 1-1/2 Blade

Engel Hot Knife / Heat Cutter with 1 Type R Cutter Blade This ENGEL heat cutter is designed for intermittent operation, and should not be used for more than twenty minutes at a time without pausing. The blade takes 6-8 seconds to heat up. Heat can be approximately controlled by using the on/off action of the trigger switch. The HSG 0 hot knife is best suited for cutting awnings, filter cloths, sail material, as well as synthetic strings and ropes.

Engel HSGM 110V Heat Cutter Hot Knife (Type-R Engel Replacement Blade)

HSGM Heibschneider HSGO Heat Knife - Used - Mara Industrial

HSGM Heibschneider Electric Heat Cutter HSG-0 230V