Glardon-Vallorbe Hand Checkering Precision Files - LP1166 — Otto Frei

Hand Checkering Width: 19 mm (3/4") Thickness: 5.3 mm (3/16") Checkering files are parallel in width and gently tapered in thickness. Over cut is parallel to file edges and uncut is 90 degree to over cut. Checkering files are used for putting serrations on knife edges and to obtain a checkered design similar to a gun h
Hand CheckeringWidth: 19 mm (3/4")Thickness: 5.3 mm (3/16")Checkering files are parallel in width and gently tapered in thickness. Over cut is parallel to file edges and uncut is 90 degree to over cut. Checkering files are used for putting serrations on knife edges and to obtain a checkered design similar to a gun hand grip. Measurements given are at thickest point. Checkering files have different teeth or lines per square inch standards than ordinary precision files. Below is a listing of cuts and lines per square inch (LPSI) in black and lines per square centimeter (LPSC) in red for both the 6" Hand Checkering files and 6" Pillar Checkering files:Cut 00 LPSI :20 LPSC:8Cut 0 LPSI: 30 LPSC:12Cut 1 LPSI: 40 LPSC:16Cut 2 LPSI: 50 LPSC:20Things you should know about ordering hand files:Glardon-Vallorbe Swiss Made Precision Files are measured from the point where the teeth begin to the end of the file. A 6" precision file will measure 8 1/2" long from tip to end of tang, but it is called a 6" file.Glardon-Vallorbe Swiss Made Precision Files are graded with a number from 00 for coarsest to 6 for finest. Remember, the higher the number the finer the cut. Part No. Legacy Part Nos. Length-Cut LP1166-6-00 131.035 & 31.035 6" Cut 00 X-Coarse LP1166-6-0 131.036 & 31.036 6" Cut 0 Coarse LP1166-6-1 131.037 & 31.037 6" Cut 1 Med-Coarse LP1166-6-2 131.038 & 31.038 6" Cut 2 Medium LP1166-8-0 N/A 8" Cut 0 Coarse LP1166-8-1 N/A 8" Cut 1 Med-Coarse LP1166-8-2 N/A 8" Cut 2 Medium Available in the following lengths:6 Inch/150mm8 Inch/200mmLengths do not include the handle section (tang)And in various cuts00 Extra Coarse0 Coarse1 Medium Coarse2 MediumGlardon-Vallorbe Swiss Made Precision Files-The world's standard for quality and performance!Glardon-Vallorbe Swiss Made Precision Files are manufactured to precise production standards, using a combination of machine cutting and hand craftsmanship to produce the most accurate, best cutting, and longest-lasting files in the world. They are made of the finest heat-tempered, chrome alloy steel and have the "right" feel, action and balanced desired by all true craftsmen. Glardon-Vallorbe Swiss Made Precision Files deliver superior performance on all metals. Simply the best you can buy!  Formerly distributed by Grobet USA under the brand name Grobet Swiss.
Hand Checkering
Width: 19 mm (3/4)
Thickness: 5.3 mm (3/16)

Checkering files are parallel in width and gently tapered in thickness. Over cut is parallel to file edges and uncut is 90 degree to over cut. Checkering files are used for putting serrations on knife edges and to obtain a checkered design similar to a gun hand grip. Measurements given are at thickest point. Checkering files have different teeth or lines per square inch standards than ordinary precision files. Below is a listing of cuts and lines per square inch (LPSI) in black and lines per square centimeter (LPSC) in red for both the 6 Hand Checkering files and 6 Pillar Checkering files:

• Cut 00 LPSI :20 LPSC:8
• Cut 0 LPSI: 30 LPSC:12
• Cut 1 LPSI: 40 LPSC:16
• Cut 2 LPSI: 50 LPSC:20

Things you should know about ordering hand files:

Glardon-Vallorbe Swiss Made Precision Files are measured from the point where the teeth begin to the end of the file. A 6 precision file will measure 8 1/2 long from tip to end of tang, but it is called a 6 file.

Glardon-Vallorbe Swiss Made Precision Files are graded with a number from 00 for coarsest to 6 for finest. Remember, the higher the number the finer the cut.

Part No.	Legacy Part Nos.	Length-Cut
LP1166-6-00	131.035 & 31.035	6 Cut 00 X-Coarse
LP1166-6-0	131.036 & 31.036	6 Cut 0 Coarse
LP1166-6-1	131.037 & 31.037	6 Cut 1 Med-Coarse
LP1166-6-2	131.038 & 31.038	6 Cut 2 Medium
LP1166-8-0	N/A	8 Cut 0 Coarse
LP1166-8-1	N/A	8 Cut 1 Med-Coarse
LP1166-8-2	N/A	8 Cut 2 Medium

Available in the following lengths:
6 Inch/150mm
8 Inch/200mm

Lengths do not include the handle section (tang)

And in various cuts
00 Extra Coarse
0 Coarse
1 Medium Coarse
2 Medium

Glardon-Vallorbe Swiss Made Precision Files-The world's standard for quality and performance!

Glardon-Vallorbe Swiss Made Precision Files are manufactured to precise production standards, using a combination of machine cutting and hand craftsmanship to produce the most accurate, best cutting, and longest-lasting files in the world. They are made of the finest heat-tempered, chrome alloy steel and have the right feel, action and balanced desired by all true craftsmen. Glardon-Vallorbe Swiss Made Precision Files deliver superior performance on all metals. Simply the best you can buy!  Formerly distributed by Grobet USA under the brand name Grobet Swiss.

Overview Reviews Product Description Free Shipping High Precision files manufactured to precise production standards, using a combination of machine

Glardon Vallorbe Checkering File 6 Hand File Coarse Cut #0 LP1166-6-0 Swiss

Glardon-Vallorbe Swiss Made Precision Files-The world's standard for quality and performance!Glardon-Vallorbe Swiss Made Precision Files are

Glardon-Vallorbe Half-Round Precision Files - LP1560

Glardon Vallorbe Checkering File 6 Hand File Cut #1 LP1166 Swiss Made

Glardon Vallorbe Swiss Checkering 6 Hand File Extra Course Cut #00 LP1166

Hand CheckeringWidth: 19 mm (3/4)Thickness: 5.3 mm (3/16)Checkering files are parallel in width and gently tapered in thickness. Over cut is

Glardon-Vallorbe Hand Checkering Precision Files - LP1166

Glardon-Vallorbe File Half-Round 6 Precision Files Swiss Made LP1560 Cut #2

Hand CheckeringWidth: 19 mm (3/4)Thickness: 5.3 mm (3/16)Checkering files are parallel in width and gently tapered in thickness. Over cut is

Glardon-Vallorbe Hand Checkering Precision Files - LP1166

Glardon Vallorbe Swiss Checkering 6 Hand File Extra Course Cut #00 LP1166

Files — Page 4 — Otto Frei

Glardon Vallorbe Checkering File 6 Hand File Extra Coarse Cut #00 LP1166 Swiss

Choose from Cuts:131.81111-0 Cut 0 Coarse131.81111-2 Cut 2 MediumGlardon-Vallorbe LR12711- Hand Riffler File 7 (180mm)Glardon-Vallorbe Swiss

Glardon-Vallorbe LR12711- Hand Riffler File 7 (180mm)

Shop Glardon-Vallorbe @ — Page 4 — Otto Frei

Glardon Vallorbe Swiss Checkering Hand File Various Lengths and Cut Sizes Jewelry Making Metal Filing LP1166