Heavy Wall Adhesive Heat Shrink, 1' Lengths

Correctly using heat shrink is easier than you may think. Once you have selected the correct type of heat shrink whether it be 2-to-1, 3-to-1, or heavy wall, you should cut it to the proper length so that the body of the heat shrink straddles the connection point and fully covers the conductors. Once ready apply steady heat from a safe distance and continually move your heat source to prevent burning. If you apply too much heat to the heat shrink it may bubble or burn. By staying at a safe distance, you can completely activate the heat shrink without burning it. Additionally, too much heat can damage the insulation of the wire or cable you are working with. This is why keeping a safe distance is so imperative. If you are using epoxy-lined heat shrink, which we highly recommend, you will see the melted epoxy flow out creating an environmental seal. With your heat shrink properly activated, you are ready to move on to another project. All of the heat shrink and tools that you have seen here are available at . Where you’ll find over 9,000 high-quality electrical products.

Large Red/Black 3:1 Heatshrink Tubing Kit

Adhesive-lined Heat Shrink Tubing

Heat Shrink Tubing Heavy Wall Adhesive Lined Dual Wall

To add a layer of protection against moisture and liquids, an adhesive liner when installed correctly will make an air tight seal., Strong dual wall

7/8 Diameter Marine Grade Adhesive Lined Dual Wall 3:1 Ratio Heat Shrink Tubing - Stick Length: 16 - 10 Sticks - Black

Electriduct 6:1 Heavy Wall Adhesive Lined Heat Shrink Tube

Heat Shrink Pacer Group

6:1 Heavy Wall Heat Shrink Tubing

2:1 Adhesive Heat Shrink - Dual Wall

Heat shrinkable tubing 6:1, adhesive lined in 1.2 m cuts HA67-33.0/5.5 (321-30100)

H-5(3X)-F Thin-wall heat shrink tubing, 3:1, With adhesive

3M™ Heat Shrink Heavy-Wall Cable Sleeve for 1 kV ITCSN-1100, no adhesive, black, 2-4/0 AWG (35 - 60 mm²), 25 ft (7.62 m)

3M™ Heat Shrink Heavy-Wall Cable Sleeves ITCSN

3M™ Heat Shrink Heavy-Wall Cable Sleeve ITCSN-1500 3/0 AWG-400 kcmil Expanded/Recovered I.D. 1.50/0.50 in 48in Length (20 EA/CS)

Heavy Wall Flame Retardant Self-Adhesive Heat Shrink Tubing 1000V