White Plastisol Ink Best Cotton & 50/50 White Screen Print Ink

MCO-1560 50/50 White is the best plastisol ink for cotton and 50/50 blends. It is ultra-bright white, has excellent opacity and good bleed resistance.
A Bright White Plastisol Ink for Cotton and 50/50 | Great for Underbase and White Printing MCO-1560 50/50 White is a plastisol ink that is more stable, printing easier and smoother due to its unique formulation. Printing this white ink manually will be less tiring. If you use an automatic screen printing machine, you can print this ink with a lower pressure setting to increase screen longevity. For a manual screen printer, any durometer and mesh count works. It’s an ultra-bright white with excellent opacity and good bleed resistance, fast-flashing, semi-thick viscosity. No odor. May be printed on cotton and cotton/polyester blends that are not bad bleeders.MCO-1560 50/50 White ink is a non-phthalate finished ink. It is recommended for cotton and 50/50 blends. While MCO-1560 is a low bleed ink ink, it is not a non-bleed ink. For 50/50 and tri-blend t-shirts that are have bad dye migration (bleeding), Lawson recommends DI-1550 Plus White. How to Use: Recommended for 100% cotton, 50/50 Cotton/Polyester Blends and some polyesters. Can be used right from the container without any modifications but it is recommended to stir prior to printing Print through any mesh count (60 - 230 recommended) with any direct or indirect emulsion of capillary film, using a 60 - 80 durometer sharp edge squeegee. Cure at approximately 325 degrees for 1 minute (dependent on dryer speed, temperature settings and other shop factors). Recommended storage at 65 to 90 degrees F. Avoid storage in direct sunlight and keep container well sealedAlways pretest before use to establish suitability and procedures prior to production.

EXCALIBUR WHITE INKS

Whites & Black - Welcome to Florida Flexible Screen Printing Products

Cool White™ - 7022 - International Coatings

IC-7022Cool White™ is a low bleed, fast flashing, low tack, flexible curing, non-phthalate plastisol screen printing ink.If purchasing 30 Gallon Drum,

International Coatings 7022 FlexCure Cool White Plastisol Ink

RUTLAND NPT SNAP WHITE Rutland, Screen printing supplies, Screen

PL Poly White is phthalate FREE finished ink used to achieve an elastic, soft touching and opaque white covering effect in textile printing with a

PL POLY WHITE

Plastisol Inks: Plastisol Poly White Ink

7014 Legacy White, Screen Printing Supplies

Metallic Gold - 92 ICC Plastisol Ink - Uniprint

EPIC 2200 Single LC White Plastisol Ink, Avient

Screen Printing on Tricky Fabrics