Round Guest Silicone Mold - 6 cavity, 1.5 oz. each

DetailsCreate classic circular soap with this traditional round silicone mold. This is our favorite mold to use with our rubber duckies or luffas. A festive rubber duck can be found for most holidays, and luffa soap is perfect for pedicures. Mold walls are built with extra thickness to prevent bowing. Material: Food Grade Silicone Maximum Product Pour Temp: 500ºF Approximate Bar Weight: 1.5 oz Measures: 2 x 2 x .75 inches Made in China Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks. Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold. Care: Hand wash in warm sudsy water.

Silikomart Professional SQ012 Silicone Mold, Disk 6.30 Inch Diameter x 0.39 Inch High, 6 Cavities One silicone mold with six cavities that brings your

Silikomart Professional SQ012 Silicone Mold, Cavity Size 6.30 Diameter x 0.39 High, 6 Cavities

6 Cavity Silicone Circle Mold

Sakolla 2 PCS Round Chocolate Cookie Molds, Cylinder Silicone Mold, Pe — CHIMIYA

Buy Horse Soap Molds

This silicone mold was perfect for the lotion bars I made for gifts. It stood up well to the heated mixture and was great at releasing them when they

X-Haibei Round Mooncake Chocolate Lotion Bar Soap Cookies Wax Silicone Mold Dia. 2.5inch, 1.5oz per Cell

6 Cavity Silicone Circle Mold

Buy KARIMOTECH Round Guest Basic Soap Lotion Bar Silicone Mold Dye 2 inch, Height 0.7 inch per Cavity 2oz per Cell For Cup Cake Making Online at Best Prices in India - JioMart.

This is a very sturdy 6 Bar Half Round Silicone Mold we think you'll love! It doesn't need support and the soap shape is unique and fits very well in

6 Bar Half Round Silicone Mold

Each cavity dimension is 2 inch Dia. X 0.7inch Height ,it can hold approx. It is good to make lotion bars and the little bars fit perfectly into the 2 oz round tins. Mold is solid thick construction, smooth surface, perfect release quality, and perfect depth for resin charms.

X-Haibei Round Guest Basic Soap Lotion Bar Silicone Mold Dia. 2inch,Height 0.7inch /Cavity

The 4 Best Popsicle Mold Sets of 2024

Silikomart Donuts Gourmand 80 Silicone Baking & Freezing Mold. Donuts Gourmand80 is born from the collaboration between Silikomart Professional

Silikomart Donuts Gourmand 80 Silicone Baking & Freezing Mold, 2.7 oz, 6 Cavities

12-Cavity 6-oz Handmade Soap Bar Silicone Mold – Boowan Nicole

1.5oz soap. Quantity: 1 mould. Suitable for candy mold / jelly mold / soap mold / chocolate mould/cake mold. Material: U.S.food-grade silicone (FDA

Round Guest Basic Silicone Soap Mold Lotion Mold 1.5oz Soap/Cell Dia. 2inch