NanoSkin AutoScrub Wash Mitt Fine Grade

(207)

Write Review

$ 30.50

Add to Cart

Qty

In stock

Description

NanoSkin AutoScrub Wash Mitt Fine Grade | Synthetic Clay Bar Alternative works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars.
NanoSkin AutoScrub Wash Mitt Fine Grade | Synthetic Clay Bar Alternative • Lasts up to 4 times longer than clay bars• For a flawless “show room perfect” shine• Glides on & off easily for a slick finish• If inadvertently dropped on shop floor, simply rinse clean Product Detail NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required. Application *For surface prep., use with NANOSKIN GLIDE Instant Spray Lubricant *To achieve best result on the paint, use with NANOSKIN NANO SHOCK Hydrophobic Spray Lubricant Sealant. *For glass prep. and hydrophilic anti-static sealant, use with RAIN PREP Glass Cleaner/Activator then follow with RAIN Glass Sealant. DIRECTIONS: Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface. Mix 1 oz of NANOSKIN BUBBLE BATH Wash & Shine Shampoo per gallon of water.Rinse surface with water to flush away loose dirt.Wash and rinse in sections with AUTOSCRUB Wash Mitt using light pressure.Begin with the roof, and work the suds down to the hood, trunk and sides.Rinse with clean water.Dry with clean and soft towels.NOTE: Sufficient lubrication is crucial to the AUTOSCRUB application. Plain water is NOT an adequate lubricant. AUTOSCRUB is not solvent resistant. Remove tar & grease before application Helpful Tips: The AUTOSCRUB has a protective coating to ensure stability within transportation. To break in the pad, moisten the AUTOSCRUB with desired lubricant. Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam. This is the protective sealant coming off. Don’t use until the polymerized rubber is soft and slightly tacky. Cold temperatures may stiffen pad. Warm surface before using. Total Import Solutions is not responsible for the misuse of this product or if the product is used in any other way than directed. There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.

NANOSKIN Eliminate Clay with AUTOSCRUB Brilliant Shine Kit – NANOSKIN Car Care Products

Best clay bar alternatives 2020

The Nanoskin AutoScrub Fine Grade Wash Mitt is a great alternative to clay bars, one side is a microfiber material, the other is a is a polymer

Nanoskin AutoScrub Wash Mitt - Fine Grade

The NanoSkin AutoScrub Sponge will help you safely remove embedded contamination from your paint! The secret is in the advanced rubber polymer technology, which can replace the use of clay bars. It can easily remove paint overspray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Just spray your favorite clay lube onto the surface (i.e.