Satin Poly Acrylic Sealer. (Gallon)

Protect your Bare Wood or Painted Surfaces with this Non-Yellowing Sealer. Two Ways to Use Our Poly. As a Sealer : Make sure the surface is free of dust. Apply Sealer using a Fine Filament Brush. Wait 3-4 hours dry time between multiple coats. Finely sand between coats & wipe Clean, TWO COATS RECOMMENDED. Allow Final Coat 8 hours to cure/dry. As a Glazing Finish : Make sure surface is free of dust. Apply sealer/glazing using a fine filament brush. Apply Pigment by sprinkling into the wet sealer. Use a second sealer dipped filament brush to spread the pigment across wet surface. Repeat to achieve desired effect. Move to new area and continue. (best to apply in small areas, so sealer will not dry before adding pigment.) CAUTION Use Poly Acrylic Sealer in a well Ventilated Area. Clear Satin Finish - Great for Protecting Bare Wood or Painted Surfaces Non-Yellowing Sealer - Low VOC - Low Odor Two Different Ways to use the Poly - Bare Wood & Painted Surfaces or Create a Glazing Finish Glazing Finish - select from 13 pigment colors (pigment sold separately) Caution: Use Poly Sealer in a well Ventilated Area. STIR THOROUGHLY - DO NOT SHAKE - AVOID BUBBLES Keep out of reach of children Caution: Use Sealer in a well Ventilated Area.

The Best Concrete Sealers of 2024, According to Testing - Bob Vila

MasonryDefender Stamped Concrete Sealer is a non-yellowing acrylic polymer blend sealer formulated for use on properly cured stamped concrete surfaces. It leaves an attractive, durable, semi-gloss finish that protects stamped concrete surfaces from damage and color loss due to ultra-violet light, moisture and abrasion/wear. MasonryDefender Stamped Concrete Sealer is designed for use on both interior and exterior concrete.

Masonrydefender Stamped Concrete Sealer 1 Gal - Clear Water-Based Semi-Gloss Sealer for Decorative Concrete Surfaces, 1 Gallon

Minwax Fast Drying Polyurethane Protective Wood Finish, Clear Satin, 1 Gallon - Household Varnishes

Minwax Satin Clear Oil-Based Fast-Drying Polyurethane 1 qt - Ace Hardware

Retique It Polyacrylic 16oz Pint 5

polyseal is a water-based, polyurethane acrylic wood finish that can be applied to all bare interior wood surfaces. The product is ideal for use on

PolySeal Water Based Polyurethane Acrylic Interior Wood Varnish - 1 Gallon Crystal Satin

CRYSTALAC Extreme Protection Polyurethane - Clear - Gloss - Pint

Eagle Clear Satin Transparent Acrylic Waterproofer (1-Gallon) in the Waterproofers & Sealers department at

8 Best Polyurethane Finishes for Wood

Classic Coatings Systems Satin Low Sheen Water Base Clear Sealer 1gal - White Cap

Polarion 2K Acrylic Urethane Interior Clear Sealer Gallon, DSI

Minwax Polycrylic Clear Satin Water-Based Polyurethane Aerosol Spray (11.5-oz) in the Sealers department at

EasyCare Cabinet Door & Trim Paint, Satin White/Pastel Base, Acrylic Polyurethane, 1 Gallon

PolySeal is a water-based, polyurethane acrylic wood finish that can be applied to all bare interior wood surfaces. The product is ideal for use on

PolySeal Water Based Polyurethane Acrylic Interior Wood Varnish - 5 Gallon Crystal Satin

Dominator STONE+ Gloss Clear Acrylic Sealer 64 Ounce| Satin Finish Stone Sealer, Clay Brick Sealer | Color Enhancing | Professional Grade | Fast Dry