Selkirk DSP6DK-1 6 Damper Kit

Allows the operator to alter the amount of air drawn through the venting system controlling the stove s combustion. Must be installed directly on the stove s flue outlet. When handle is in horizontal position the damper is closed reducing combustion. The closed position is still 20 percent open so the venting system is not completely blocked. When handle is in vertical position the damper is wide open no reduction of combustion.

Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the Tee snout, using a locking band, to pass safely through combustible walls. An insulated tee cap is included which can be removed from bottom opening for inspection and cleanout. Maximum height of chimney which can be supported by an insulated Tee is 50 ft.

Selkirk 8t-it 8 Insulated with Cap Tee

6 Inch Double Wall Stove Pipe - Selkirk Stove Pipe

Selkirk Fireplaces & Stoves for sale

Selkirk DSP7DK-1 Stove Pipe Damper Kit, 7 – Toolbox Supply

field control vent damper motor 46491600 hva and 50 similar items

Chimney Pipe / Venting Pipe :: Wood/All-Fuel Piping :: 6 inch

Not getting enough heat - New Drolet 1800 - Do I need a flue

Easy-twist design allows you to block outside air when your appliance is not in use 6 in length

6 Diameter Champion Double Wall Damper | Woodland Direct

6'' DSP Finishing Trim - DSP-FB

JM8RS 8IN CHIMNEY ROOF SUPPORT Castle Building Centres Group Ltd.

SELKIRK 6 to 8 Damper Kit (Double Wall Stove Pipe) – US Fireplace Store