Granite/Marble Sink Anchor Kit (4 Sets of Hardware + 633 Epoxy) - Counter Balance

Chem-Set 742K Sink & Dishwasher Anchor Kit (4 Sets of Hardware + 25ml Hand Syringe 633 Epoxy Adhesive) includes all necessary sink mounting hardware for undermount sinks and dishwashers on granite and marble countertops without the need to drill holes. Each kit contains undermount studs, sink mounting brackets, Chem-Set 633 Epoxy, mixing cups, and mixing sticks. Benefits: The kit is designed specifically for use with granite and marble countertops. No additional glues are needed. The stud base glues to the underside of the counter using the included epoxy. The 1-1/2" diameter stud base is designed to fit into tight areas. Easily install sinks using the included wing nuts, lock washers and sink clips. Included in the kit is a 25ml Hand Syringe with 633 Epoxy, mixing sticks and mixing cups for multiple applications. Each Undermount Stud set includes four sets of sink mounting brackets/mounting hardware plus two extra sets of hardware for dishwasher installation. Each Kit will Contain: (4) M1-RB38-1/4-20x0.75" Studs (4) Z-Shaped Sink Clips (4) Wingnuts (4) Washers (2) F1CT Dishwasher Fasteners (1) 633 Epoxy, 25ml Hand Syringe (2) Mixing Stick (2) Mixing Cups Instructions: Remove the cap from the 633 Epoxy Adhesive. Dispense a small amount of adhesive until adhesive is flowing from both sides of the syringe. 25ml Hand Syringe: Push adhesive out in equal amounts in provided mixing cup and mix thoroughly with mixing stick until the color is completely uniform. Clean the area to be bonded and the glue-on fastener with alcohol. Surface must be clean and dry for good adhesion. Carefully apply 633 Epoxy to the base of the glue-on fastener and set in the desired position on the underside of the countertop around the sink cut-out. Allow 45-60 minutes for adhesive to reach the proper handling strength. Note: Adhesive will continue to cure for up to 24 hours. Once the adhesive has reached handling strength, place the sink into position, mount the ‘Z’-shaped sink bracket onto the glue-on fastener, add washer, then tighten with the wingnut. Product Attachments Sink Anchor Kit Instructions (521.41 kB)

GRANITE REPAIR KIT - Quickly fixes Chips, Scratches, Dents, or Deep Scratches on countertops. Granite repair kit can give your countertops a new look.

Granite Repair Kit, Marble Repair Kit, Quartz Countertop Repair Kit, Suitable for Granite, Marble, Granite Countertop Repair Kit, Marble Chip Repair

Kingston Brass Fauceture KVPB36MOQ7 36-Inch Carrara Marble Console Sink, Marble White

Chem-Set™ 633 5-Minute Gel Epoxy is a fast-curing, thixotropic, non-migrating adhesive designed for filling gaps and bonding rough or smooth surfaces.

Chem-Set™ 633 5 Minute Gel Epoxy Adhesive

Chem-Set 743K Solid Surface/Quartz Sink Anchor Kit (4 Sets of Hardware + 605 Acrylic) is an excellent choice for securing undermount kitchen sinks and

Solid Surface/Quartz Sink Anchor Kit (4 Sets of Hardware + 605 Acrylic)

Sinks & Faucets, Design Center

With a beautiful Carrara marble counter top, this console sink set is a long lasting, durable, and elegant addition to your bathroom. A fabulous alternative where space is limited or tight, making them friendly for the whole family. With different shades and natural designs, otherwise known as veining, no two sinks will be alike. Also for your convenience, anti-slip rubber pads are included with the brass legs to ensure steadiness.

Kingston Brass KVPB3622M86 36 in. Edwardian Console Sink with Brass Legs - 8 in. 3 Hole, Marble White & Polished Nickel

Chem-Set 742K Sink & Dishwasher Anchor Kit (4 Sets of Hardware + 25ml Hand Syringe 633 Epoxy Adhesive) includes all necessary sink mounting hardware

Granite/Marble Sink Anchor Kit (4 Sets of Hardware + 633 Epoxy)

ChemSet 749K Dishwasher Mount Kit (2 Sets of Hardware + 633 Epoxy) - Chemical Concepts

Chem-Set Stamped Metal Sink clips are used for undermount sink mounting. Made in the USA and used in conjunction with the Keep-Nut sink anchors or

Chem-Set™ Metal Sink Clips

Instant Install 29 – 20-Ounce Epoxy – Granite, Tile, Marble, Quartz, Corian – Permanent Stone Repair – Broken Chips/Cracks – Rebonds/Rebuilds Missing Pieces – Dry in 29 Minutes – Tintable with EZ-Tint

Kingston Brass Fauceture KVPB36MOQ7 36-Inch Carrara Marble Console Sink, Marble White

CORIAN REPAIR KIT - Repair chips and cracks & fill holes on marble granite quartz corian countertops tiles and stones DIY COLOR MATCH KIT - Kit

Granite Repair Kit & Marble Repair Kit (Color Match), Quartz Countertop Repair Kit, Granite Epoxy for Marble Granite Porcelain Quartz Corian Tiles and

Instant Install 29 – 20-Ounce Epoxy – Granite, Tile, Marble, Quartz, Corian – Permanent Stone Repair – Broken Chips/Cracks – Rebonds/Rebuilds Missing Pieces – Dry in 29 Minutes – Tintable with EZ-Tint

ChemSet 742K 25mL Sink Anchor Kit (4 Sets of Hardware + 633 Epoxy) - Chemical Concepts