Mold Making Silicone Thinner - GT Products, Inc
GT Products silicone thinner can be used to drop the viscosity of any mold making silicone. This thinner is a 50 Centistoke Dimethyl Fluid and will be compatible with any GT Products Silicone system. Lowering the viscosity of a mold making system can allow the silicone to easier flow into smaller detail. GT Products, Inc. recommends only adding 3% to 5%. Adding too much silicone fluid can adversely effect the physical properties of the silicone itself. Tear and tensile strength will be the most greatly effect properties if too much silicone thinner is used.
Mold Max™ 20 Standard - 1.1kg - AMT Composites
Mold Making Silicone Thinner - GT Products, Inc
GT-5092 Pail Kit - GT Products, Inc
Liquid Silicone Rubber For Making Gypsum Plaster at Best Price in
Cast-a-Mold silicone thinner is compatible with any of our silicone rubbers used to lower the viscosity allowing the silicone to flow more easily.
Silicone Thinner
Compression Molding Epoxy - Entropy Resins
RTV-2 Platinum Silicone Rubber Liquid Silicone Rubber Mold Maker 1
Christmas Silicone Mold - Silicone Zone Life is Art!
Mold Making Silicone
Adhesives - Chemical Concepts
