Magnetic Iron Powder - Turn Ordinary Primer to Magnetic Primer

4.8

(597)

Write Review

$ 12.00

Add to Cart

Qty

In stock

Description

For interior use on drywall and plaster to create a magnetic attraction.Contains iron pigment powder. Safety first! Wear protective goggle. 1 Gallon Mixture Covers an area of approximately 120 to 160 square feet with two to three coats or about 80 to 85 square feet with four coats. 1/2 Gallon Mixture Covers an area of approximately 60 to 80 square feet with two to three coats or about 40 square feet with four coats. 1 Quart Mixture Covers an area of approximately 30 to 40 square feet with two to three coats or about 20 square feet with four coats.Mixed entire iron powder with white interior oil-based or latex primer, stir iron powder thoroughly into primer prior to use and again between coats, continue to stir product throughout application to keep iron pigments evenly dispersed.For best result apply at least four coats of mixed primer to surface, wait for it to dry between coats or follow primer manufacture recoating timeUse a dense, 1/4” foam roller and apply with a consistent up and down motion during application.First coat of mixed primer should be sufficient enough to completely hide underlying paint or surface and recoats should be of equal thickness.It is not advised to store unused mixed primer, dispose responsibly.Wait 24 hours before applying top coat paint to ensure magnetized surface completely dry. We recommend using one coat of an eggshell paint because it is harder and will hold up to more use than a flat paint. Simply wait until the last coat of the magnetic paint is dry before covering with your color choice of paint.Perform best with strong heavy-duty rare earth magnets with minimal weight.
For interior use on drywall and plaster to create a magnetic attraction.Contains iron pigment powder. Safety first! Wear protective goggle. 1 Gallon Mixture Covers an area of approximately 120 to 160 square feet with two to three coats or about 80 to 85 square feet with four coats. 1/2 Gallon Mixture Covers an area of approximately 60 to 80 square feet with two to three coats or about 40 square feet with four coats. 1 Quart Mixture Covers an area of approximately 30 to 40 square feet with two to three coats or about 20 square feet with four coats.Mixed entire iron powder with white interior oil-based or latex primer, stir iron powder thoroughly into primer prior to use and again between coats, continue to stir product throughout application to keep iron pigments evenly dispersed.For best result apply at least four coats of mixed primer to surface, wait for it to dry between coats or follow primer manufacture recoating timeUse a dense, 1/4” foam roller and apply with a consistent up and down motion during application.First coat of mixed primer should be sufficient enough to completely hide underlying paint or surface and recoats should be of equal thickness.It is not advised to store unused mixed primer, dispose responsibly.Wait 24 hours before applying top coat paint to ensure magnetized surface completely dry. We recommend using one coat of an eggshell paint because it is harder and will hold up to more use than a flat paint. Simply wait until the last coat of the magnetic paint is dry before covering with your color choice of paint.Perform best with strong heavy-duty rare earth magnets with minimal weight.