2.5 inch nozzle tips, 5 ct. Works with E-6000 adhesive, FITS 3.7 oz TU – My  Supplies Source

2.5 inch nozzle tips, 5 ct. Works with E-6000 adhesive, FITS 3.7 oz TU – My Supplies Source

4.8
(523)
Write Review
More
$ 2.99
Add to Cart
In stock
Description

********** PLEASE NOTE: These tips ONLY fit the 3.7oz tube of e6000, (not included with this listing, but available in my shop) : ************ Get added control when applying E-6000 adhesive! These 2.5" long nozzles screw directly onto the 3.7 oz (110 ml) size E-6000 tubes. You can pierce a hole in the end for a super

********** PLEASE NOTE: These tips ONLY fit the 3.7oz tube of e6000, (not included with this listing, but available in my shop) : ************

Get added control when applying E-6000 adhesive! These 2.5 long nozzles screw directly onto the 3.7 oz (110 ml) size E-6000 tubes. You can pierce a hole in the end for a super fine tip, but there are more ways than that to use these nozzles! If you look at the nozzles closely, you'll notice that each nozzle has 5 steps to it. You can cut one nozzle at each step (you get 5 nozzles- see how cool this works!) therefore giving you 5 different sized glue applicators. It's like having 5 different sized glue bottles all in one! (Glue not included)
5 nozzle tips

Cool tip for cleaning the nozzles:
there will be a little bit of glue left in the nozzle when you are done using it. Remove the nozzle from the glue tube and replace the cap onto the tube. Insert a small wooden dowel, Popsicle stick, etc. into the wet glue in the nozzle and allow to dry. Since the glue doesn't completely adhere to the material the nozzle is made out of, you can easily pull out the remaining glue, which is now stuck to the wood. Discard the wooden stick, or if you'd like to reuse it, just peel the glue off and keep it handy for next time!

CE6007 = E6000 Glue - 1oz Tube with Precision Tips by FDJtool - FDJ Tool

Asonlye Glue Tips, 100Pcs CA Glue Tips, Precision Glue Micro-Tips for Bottles with Nozzle, Use for Hobby for Hobby, Crafting, Lab Dispensing: : Industrial & Scientific

RLECS 20pcs Snip Tip Applicator Adhesive Tube Tips Cap for E6000 Craft Glue 3.7 Ounce Adhesive Tubes, White : Arts, Crafts & Sewing

CE6007 = E6000 Glue - 1oz Tube with Precision Tips by FDJtool - FDJ Tool

Eclectic Products 230012 3.7 oz Amazing E-6000 Craft Adhesive Uncarded, Clear 6 Pack : Arts, Crafts & Sewing

Raincovo Pressure Washer Nozzles Tips Set, 5 Degrees Nozzles with 2 Second Story Nozzles, 1/4 Inch Quick Connect, 7 Pack, Orifice 3.0 : Patio, Lawn & Garden

Fluid Nozzle Air Cap Set for The G6600 Series Spray Gun

epartsetc store only gives extra caps - Useful to dispense E6000 glue from the tube accurate dispensing of E6000 glue for your arts and craft work

1st Choice Snip Tip Applicator Tips Cap for E6000 Craft Glue 3.7 Ounce Adhesive Tubes (4 pc)

20 Pack e6000 Snip Tip Applicator Tips Cap for E6000 Craft Glue 3.7 Ounce Adhesive Tubes

A unique adhesive formulated to meet high performance industrial requirements, making it an exceptional craft glue. Works on wood, metal, glass, fiberglass, ceramic, leather, rubber, vinyl and many plastics. It's acid-free when fully cured, so it's safe to use for scrapbooks and photo albums. Washer and dryer safe. Package contains four .18 ounce tubes of E6000 Adhesive. Made in the USA.

Amazing E6000 Multi-Purpose Adhesive - 4 Pkg, 0.18 oz